Native Instruments MASCHINE MIKRO MK3 Manual page 606

Parameter
INPUT Section
Source
Gain
FILTER Section
Filter
Center Freq
Width
On your controller the outputs available in the
the Source selector described above.
For more information on how to use the side-chain input, please refer to section
Side-Chain Input.
Description
Selects the audio signal you want to use as side-chain signal to
control the Plug-in. Available options are None (side-chain
disabled, default setting), the outputs of all (other) Sounds , and
the outputs of all (other) Groups.
In the menu these outputs are labeled as follows:
For Groups: [Group name] (e.g., Drums)
For Sounds: [Group name]: [Sound name] (e.g., Drums: Kick)
In the selector display these outputs are labeled as follows:
For Groups: [Group name] (e.g., Drums)
For Sounds: [Group letter+number]:S[Sound number] (e.g.,
the Sound 4 of Group A1)
Adjusts the input level of the side-chain signal fed into the Plug-in.
Activates a filter on the side-chain input. This filter can be useful to
select only a specific frequency range of the side-chain signal to
control the Plug-in.
Adjusts the center frequency of the filter.
Adjusts the bandwidth of the filter.
SOURCE parameter are labeled as in the display of
MASCHINE MIKRO - Manual - 606
Effect Reference
Dynamics
A1:S4 for
±14.1.3, Using the