Native Instruments MASCHINE MIKRO MK3 Manual page 330

Main Page
Element
MAIN Section
Engine
Tune
Decay
Bend
Impact
Gate
AERO Section
Description
Selects the engine used in the Kick Plug-in. If you change this
setting, please refer to section 10.2 <The Kicks= in the
MASCHINE 2.0 Manual.
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 31.00 to
55.00. The default value is 43.00.
Adjusts the duration of the sound9s tail, measured as a percentage.
Available values range from 0.0 to 100.0% (default: 50.0%).
Adjusts the amount of pitch envelope applied to the kick, measured
as a percentage. Available values range from 0.0 to 100.0%
(default: 6.8%).
Adjusts the amount of click or initial attack, measured as a
percentage. Available values range from 0.0 to 100.0% (default:
75.0%).
When enabled, the decay of the drum is choked by the end of the
note. When disabled, the drum plays as a one-shot sound, i.e. until
the end of its tail, no matter when the note is released, although the
sound duration will still depend on the
above). Switching Gate
high value while playing short notes can result in a punchier, more
aggressive character than simply using short
off.
Decay parameter (see
on and setting the Decay
Decay
MASCHINE MIKRO - Manual - 330
Using the Drumsynths
The Kicks
parameter to a
values with Gate