The Mixer - Native Instruments MASCHINE MIKRO MK3 Manual

Controlling Your Mix

The Mixer

(1) Mixer: At the top, the Mixer shows you at a glance the level and routing settings for all
Sounds of the focused Group, or all Groups in your Project. You can change these settings on
the fly, select or put the focus on any channel, etc. At the far right you can control the settings
for the parent channel 4 the Group channel if the Mixer displays Sound channels, or the Mas-
±13.2, The Mixer
ter/Cue channel if the Mixer displays Group channels. See section for a de-
tailed description.
(2) Plug-in Chain: In the middle, the Plug-in Chain lists all Plug-ins loaded in the focused
±13.3, The Plug-in Chain
channel (Sound, Group, or Master). See section for a detailed de-
scription.
(3) Plug-in Strip: At the bottom, the Plug-in Strip displays the series of Plug-ins loaded in the
focused channel (Sound, Group, or Master). You can directly adjust the parameters of each
±13.4, The Plug-in Strip
Plug-in in its own interface. See section for a detailed description.
13.2 The Mixer
Sitting in the top part of the Mix view, the Mixer is ideal to quickly see and adjust the level and
routing settings of different channels in one go.
MASCHINE MIKRO - Manual - 541