Step 2: Route Audio To The Send Effect; A Few Notes On Send Effects - Native Instruments MASCHINE MIKRO MK3 Manual

²
The Sound slot now mirrors the Plug-in name.
For more information on renaming Sound slots, see section
14.3.2

Step 2: Route Audio to the Send Effect

Once you have configured a Sound or Group as send effect (see
Sound or Group as Send
that Sound or Group. For this purpose, each Sound and each Group is equipped with an addi-
tional two auxiliary outputs available in its Output properties.
Here we describe the procedure in Arrange view. You can also do this in Mix view 4 see section
±12.1.2, Configuring the Main Output of Sounds and
You can repeat the process to route more Sounds/Groups to the same send effect, or route the
same Sound/Group to an additional send effect send using
14.3.3

A Few Notes on Send Effects

When working with send effects, please keep in mind the following:
▪ You cannot send the Master output to send effects.
▪ You cannot send a send effect9s output to itself, nor the output of a Group to one of its own
Sounds.
However, you can:
▪ Chain several Sounds configured as send effects by sending the output of a send effect in-
to another send effect using the method described above (see
dio to the Send Effect).
▪ Use the Effect Plug-ins loaded in a Group to simultaneously process its own Sounds and
other Sounds/Groups sent to it.
This opens up virtually endless routing possibilities!
Effect), you can send the output of any other Sounds and Groups to
±5.2.3, Renaming Sound
±14.3.1, Step 1: Set Up a
Groups.
AUX 2.
±14.3.2, Step 2: Route Au-
MASCHINE MIKRO - Manual - 587
Using Effects
Creating a Send Effect
Slots.