Loading A Loop Into The Audio Plug-In - Native Instruments MASCHINE MIKRO MK3 Manual

Using the Audio Plug-in

Loading a Loop into the Audio Plug-in

8.1 Loading a Loop into the Audio Plug-in
You can use the Sampler Plug-in to record sound directly from a microphone, or from an elec-
tric instrument (such as an electric guitar) connected to your soundcard, to create your own
loops. Alternatively, you can quickly audition loops within the MASCHINE Library by using the
Loops tag in the Browser to find one you want. To learn how to filter for loops using the Brows-
±4.2.6, Selecting Type and Mode
er, refer to the section Tags.
It is possible to load a Sample tagged as Loops directly from the Browser by dragging and
dropping it onto an empty Sound, which will place the Sample directly within the Pattern. As
the Sample is loaded into the Pattern a waveform of the Sample will become visible and MA-
SCHINE will seamlessly determine tempo information from the Sample and automatically time
stretch it to fit the tempo of your Project. You can begin playback immediately after it has
loaded.
Pattern Editor with the Audio Plug-in in Loop mode loaded on Sound 4.
MASCHINE MIKRO - Manual - 310