Using Ideas View; Scene Overview - Native Instruments MASCHINE MIKRO MK3 Manual

1. Press SHIFT + SCENE
2. Press the Right Arrow button to access Retrigger.
3. In the display you see the current Retrigger value
4. Turn the Control knob to select On.
The next time you select a new Section or loop range, it will start from the beginning.
Make sure you have created at least one Section before you try to set the Retrigger setting; other-
wise, the setting will not be available.
16.2

Using Ideas View

The Ideas view allows you to experiment with your musical ideas without being tied to a time-
line or any kind of arrangement. Here you can create Patterns for each Group and combine
them into a Scene.
In Ideas view, MASCHINE provides a perfect overview of all your Scenes, Patterns and Groups.
Here you can create a Scene by selecting a Pattern for each Group, duplicate your Scenes,
clear a Scene and more importantly trigger your Scenes to so you can hear how they sound
when played in a particular order.
Pressing a pad in Scene mode will trigger a Scene and in turn trigger all the assigned Patterns.
In addition to creating ideas, Scene mode is fantastic for improvisation during a performance.
16.2.1

Scene Overview

In the software, all Scenes can be managed from the Ideas view:
►
To open Ideas view, click the Arranger View button on the left of the Arranger.
²
When the button is unlit Ideas view is active, when the button is lit Song view is active.
(Section) to select Section mode.
(Off by default).
MASCHINE MIKRO - Manual - 681
Working with the Arranger
Using Ideas View