Native Instruments MASCHINE MIKRO MK3 Manual page 761

You can adjust the width of the Zone List by dragging its right border.
Adding a New Zone to the Zone List
You can add a new Zone to the Zone List in two ways:
►
Drag a Sample from the Browser9s
onto the empty area in the Zone List.
or
1. Click the <+= at the end of the Zone List.
A Load Sample dialog opens up.
2. Navigate to the desired audio file on your operating system and press [Enter] to confirm.
² A new Zone is created at the end of the list containing the dragged or selected Sample.
You can drag and drop several Samples at once: It will creates as many new Zones!
You can also add Zones to your Sound by dragging and dropping Samples directly onto the Sample
Map of the Map view. See section
Replacing the Sample of an Existing Zone
You can also put a new Sample into an existing Zone, thereby replacing the Sample currently
contained in that Zone. Again, you have two methods at your disposal:
LIBRARY or FILES pane or from your operating system
±17.5.7, Adding Samples to the Sample Map
Sampling and Sample Mapping
Mapping Samples to Zones
for more on this.
MASCHINE MIKRO - Manual - 761