Configuring The Master And Cue Outputs Of Maschine - Native Instruments MASCHINE MIKRO MK3 Manual

5. In the channel strip of the desired Sound or Group, click the
fault labels) at the bottom of the strip and select the desired destination in the menu.
This is equivalent to setting the
6. Adjust the level for that auxiliary output via the little knob at the right of the menu.
This is equivalent to setting the
7. Set the pre/post state of the auxiliary output by clicking the
the menu.
This is equivalent to setting the
12.1.4

Configuring the Master and Cue Outputs of MASCHINE

All channels routed to the Master are mixed together and processed by the Plug-ins loaded in
the Master, if any. The result is then sent to the Master output (that is, MASCHINE9s main out-
put).
Dest. parameter described above.
Level parameter described above.
Order parameter described above.
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
AUX 1 or AUX 2 label (de-
Post (or Pre) label right under
MASCHINE MIKRO - Manual - 501