Native Instruments MASCHINE MIKRO MK3 Manual page 643

Parameter
MAIN Section
Mode
Drive
Color
Feedback
Tone
Tone Mod
OUTPUT Section
Mix
GATE Section
Gate
Release
Analog Distortion
Analog mode adds grit to Drums and Percussion, Lead Synths and Guitars.
Element
MODE Section
Mode
DISTORTION Section
Saturation
Description
Select a distortion type:
Determines the basic amount of distortion.
At lower settings, the general sound is a bit more muffled; the
higher the settings, the brighter it sounds.
Adjust the amount of output signal fed back into the input.
General tonal characteristic of the feedback signal.
Modulation introduced in the feedback signal.
Mix lets you adjust the amount of the effect in relation to the
dry original audio signal.
The Gate button is used to cancel out feedback loops
introduced by high
This parameter determines how fast the distorted sound dies
down when the Gate
Description
Select a distortion type:
Sets the amount of saturation applied to the signal. Available values
range from 0.0 to 100.0% (default: 25.0%).
Mullholland or Analog.
Feedback settings.
is enabled.
Mullholland or Analog.
MASCHINE MIKRO - Manual - 643
Effect Reference
Distortion Effects