Page 3: Fx / Filter - Native Instruments MASCHINE MIKRO MK3 Manual

Parameter
AMPLITUDE ENVELOPE
Attack (AHD and
ADSR)
Hold (AHD only)
Decay (AHD and
ADSR)
Sustain (ADSR only)
Release (ADSR only)
7.2.3

Page 3: FX / Filter

Sampler parameters 3 page 3 of 6: FX and FILTER in the software.
FX
This is a small selection of basic effects, not to be mixed up with the collection of Effect Plug-
ins covered in depth in chapter
Description
Attack determines how quickly the Sound reaches full volume after
being triggered.
Hold determines how long the envelope will stay at its maximum
level.
Decay determines how fast the envelope drops to the
ADSR mode; in AHD mode, it is used to adjust how fast the Sound
dies down. This parameter can also be modulated by the Velocity
control, see ±7.2.5, Page 5:
Sustain determines the constant level being kept after
the note ends. This can also be controlled by an external MIDI
controller or keyboard using the MIDI Control Change 64.
Release determines how long the sound takes to fade out after the
note has ended.
±15, Effect Reference.
LFO.
MASCHINE MIKRO - Manual - 287
Working with Plug-ins
The Sampler Plug-in
Sustain level in
Decay until