Native Instruments MASCHINE MIKRO MK3 Manual page 499

The Aux page of the Output properties (here for a Group) in the software.
Please refer to section
Control Area to know how to access the
your controller.
Controls
AUX 1 / AUX 2 Section
Dest.
Level
Order
If MASCHINE is running as a plug-in, the external stereo outputs Ext. 1316 available in the
selectors of the AUX 1
you to send auxiliary outputs of individual Sounds or Groups from MASCHINE to their own mixer
channels within your DAW, for example.
Setting Up the Auxiliary Outputs of Sounds and Groups in Mix View
You can also easily set up auxiliary outputs for your Sounds and Groups in MASCHINE9s Mixer:
±3.3.5, Navigating Channel Properties, Plug-ins, and Parameter Pages in the
Aux page of the Output properties in the software and from
Description
Selects where you want to send the Aux 1 or Aux 2 output of your
channel. Available options are the same as for the
±12.1.2, Configuring the Main Output of
the Audio page (see
Sounds and Groups), except that for Aux 1 and Aux 2 the default
destination is None 4 in other terms there are no auxiliary sends
defined by default.
Adjusts the level of the signal sent to the Aux 1 or Aux 2 output.
If Order is set to Pre, the channel will be fed into Aux 1 or Aux 2
before the Level and Pan
page are applied. If Order
and Pan settings of the main output also affect the signals sent to
the auxiliary outputs.
and AUX 2 section will correspond to virtual outputs in your host. This allows
Audio Routing, Remote Control, and Macro Controls
settings of the MAIN section on the
is set to Post (default setting), the
MASCHINE MIKRO - Manual - 499
Audio Routing in MASCHINE
Dest. selector of
Audio
Level
Dest.