Moving Sounds - Native Instruments MASCHINE MIKRO MK3 Manual

4. Press the pad of the target Sound slot (this can also be in another Group, in this case first
press GROUP, then the pad of the desired Group, then
²
All parameters of the Sound will be copied (including the Pattern content for that Sound
if you have enabled the
previously loaded in the target Sound slot.
5.2.7

Moving Sounds

You can reorder Sounds via drag-and-drop in the software. It can be helpful to organize your
Sounds more conveniently. Notably, this allows you to move your Sounds to other pads, and
create a Group that is easier to play from the pads.
You can select multiple Sounds to move them all at once! See
Groups for more information.
To move one or more Sounds:
1. Click and hold the desired Sound slot(s) in the Sound List or in the Pad view.
2. While holding the mouse button, drag your mouse toward the desired location in the
Sound List or in the Pad view.
As the mouse cursor moves an insertion line appears at the potential places where you
can drop the Sound slot(s).
3. When the insertion line appears at the desired location in the Sound List or in the Pad
view, release the mouse button.
Copy Events option). The copied Sound will replace any Sound
Managing Sounds, Groups, and Your Project
GROUP again to deactivate it).
±5.1.3, Selecting Multiple Sounds or
MASCHINE MIKRO - Manual - 196
Managing Sounds