Native Instruments MASCHINE MIKRO MK3 Manual page 422

Replace Mode
When recording in Replace mode the events of the selected Sound(s) are replaced by what you
play.
1. Select the Sound(s) of which you want to replace events: In Pad Mode you can select
multiple Sounds (see section
mode only the focused Sound (the one played by your pads) will have its events replaced.
2. Press PLAY to start the sequencer.
The PLAY button lights up.
3. Press ERASE + REC
The ERASE and REC
4. Hit the pads you want to record.
Each hit will create an event in the Pattern Editor, the event length depends on how long
you hold the pad. Existing events for the selected Sound(s) are deleted as they are
reached by the playhead.
5. When you9re done, press
The ERASE and REC
again.
In order to prevent you from erasing events accidentally, in following situations Replace mode
is automatically disengaged
▪ When the playback loops (whether at the end of the Loop Range or at the end of your
Project).
▪ When you stop the sequencer (by pressing the lit
▪ When you jump to another location in the Project (see section
er Playback Position in the
▪ When you switch your controller to another mode (by pressing, e.g., SCENE, PATTERN,
etc.).
▪ When you set the focus to another Group.
You can also manually disengage Replace mode and switch to Overdub mode:
►
While recording in Replace mode, press the lit
±5.1.3, Selecting Multiple Sounds or
to begin recording in Replace mode.
buttons light up.
REC again to stop recording the pads.
buttons turn off. The sequencer keeps playing until you press
(ERASE turns off) and the recording continues in Overdub mode:
Pattern).
Groups); in Keyboard
PLAY button).
±11.1.4, Jumping to Anoth-
ERASE button to disengage Replace mode.
MASCHINE MIKRO - Manual - 422
Working with Patterns
Recording Patterns in Real Time
PLAY