Velocity / Modwheel - Native Instruments MASCHINE MIKRO MK3 Manual

7.2.6 Page 6: Velocity / Modwheel
Sampler parameters 3 page 6 of 6: VELOCITY DESTINATION and MODWHEEL DESTINATION in the software.
VELOCITY DESTINATION
This section allows you to use the input velocity in order to modulate various parameters.
Parameter
Start
Decay
Cutoff
Volume
MODWHEEL DESTINATION
Here you can determine how incoming MIDI data sent by the Modulation Wheel affects various
parameters.
Modulation Destination
Start parameter of the PITCH / GATE
page (page 2). Positive values shift the Sample start position later in
time as you play harder, negative values shift it closer to the
beginning of the Sample as you play harder.
Tip: a typical example for this parameter is setting it so that the
initial attack transient of a snare drum is heard only at high velocity
values. This makes it sound <snappier= when you play hard, and
<muffled= or muted when you play softly.
Decay parameter of the
Pitch / Envelope page (page 2).
Cutoff parameter of the
BP2 only) on the FX / Filter
This allows you to modulate the volume, which is what velocity
normally is used for.
section on the
AMPLITUDE ENVELOPE
FILTER section (with filter types LP2, HP2,
page (page 3).
MASCHINE MIKRO - Manual - 292
Working with Plug-ins
The Sampler Plug-in
Pitch / Envelope
section on the