Native Instruments MASCHINE MIKRO MK3 Manual page 70

►
To adjust the Tempo (Beats Per Minute) value of your Project, click the
the mouse button and drag vertically.
3.3.1.2 Adjusting Volume, Swing, Tempo and Tune on Your Controller
Adjusting Volume
►
Press the VOLUME
²
The VOLUME button lights up. You can now adjust the volume for your overall Project, for
each Group, and for each Sound individually using the Encoder:
▪ To adjust the overall volume, turn the Encoder. Hold
crements.
▪ To adjust the volume of a particular Group, hold its Group button (A3H) and turn the En-
coder. Hold SHIFT
▪ To adjust the volume of an individual Sound, press and hold its pad and turn the Encoder.
Hold SHIFT to adjust the value in finer increments.
As you adjust the volume, the display indicates the current value.
It is recommended you try this while your Pattern is playing, you will immediately hear the effect of
your changes.
Adjusting Swing
Now adjust the overall swing of your Project. The Swing feature shifts some of the played
notes, hereby adding some <groove= to your Pattern. The procedure is similar to the one descri-
bed above for the volume:
►
Press the SWING button next to the Encoder.
²
The SWING button lights up. You can now adjust the swing for your overall Project, for
each Group, and for each Sound individually using the Encoder:
▪ To adjust the overall swing, turn the Encoder. Hold
ments.
button next to the Encoder.
to adjust the value in finer increments.
SHIFT to adjust the value in finer in-
SHIFT to adjust the value in finer incre-
MASCHINE MIKRO - Manual - 70
Basic Concepts
Common Operations
BPM value, hold