New Features In Maschine 2.7.10 - Native Instruments MASCHINE MIKRO MK3 Manual

▪ References to keys on your computer9s keyboard you9ll find put in square brackets (e.g.,
<Press [Shift] + [Enter]=).
► Single instructions are introduced by this play button type arrow.
² Results of actions are introduced by this smaller arrow.
Naming Convention
Throughout the documentation we will refer to MASCHINE controller (or just controller) as the
hardware controller and MASCHINE software as the software installed on your computer.
The term <effect= will sometimes be abbreviated as <FX= when referring to elements in the MA-
SCHINE software and hardware. These terms have the same meaning.
Button Combinations and Shortcuts on Your Controller
Most instructions will use the <+= sign to indicate buttons (or buttons and pads) that must be
pressed simultaneously, starting with the button indicated first. E.g., an instruction such as:
<Press SHIFT + PLAY=
means:
1. Press and hold SHIFT.
2. While holding SHIFT, press
3. Release SHIFT.
1.3

New Features in MASCHINE 2.7.10

The following new features have been added to MASCHINE:
New Hardware Support
▪ Support for KOMPLETE KONTROL A-Series keyboards.
PLAY and release it.
Welcome to MASCHINE
New Features in MASCHINE 2.7.10
MASCHINE MIKRO - Manual - 26