Native Instruments MASCHINE MIKRO MK3 Manual page 544

Hide thumbs Also See for MASCHINE MIKRO MK3:

Table of Contents

Mixer Displaying the Sound Level

The Mixer can alternatively display the Sounds slots of a particular Group:

In this mode the desk9s input strips (1) represent all Sounds of the focused Group, while the

output strip at the far right (2) represents that focused Group. At the top of the Mixer you see

▪ The first row (3) contains the headers of all your Groups and of the Master/Cue channel.

The header of the focused Group (or of the Master/Cue at the far right) is highlighted.

▪ The second row (4) contains the headers of the Sound slots in the focused Group. The

header of the focused Sound slot (or of the parent Group at the far right) is highlighted.

Switching the Mixer Between Group and Sound Level

At any time you can switch between both display modes:

To switch the Mixer display between all Groups of your Project and all Sound slots in a

particular Group, double-click the background of any Group header at the top of the Mix-

If the Mixer was displaying Sound strips beforehand, it will display all Group strips in-

stead, and the Group you have double-clicked will be focused. If the Mixer was displaying

Group strips beforehand, it will instead display all Sound strips of the Group that you have

double-clicked. The last focused Sound slot in that Group will be focused again.

Controlling Your Mix

MASCHINE MIKRO - Manual - 544

Show Quick Links

Table of Contents