Modulation - Native Instruments MASCHINE MIKRO MK3 Manual

7.2.4 Page 4: Modulation
Sampler parameters 3 page 4 of 6: MODULATION ENVELOPE and DESTINATION in the software.
MODULATION ENVELOPE
The MODULATION ENVELOPE
tion (or <modulation=) of specific Sampler parameters according to the way you play on the
pads. Its parameters are matched to those of the
±7.2.1, Page 1: Voice Settings /
(see
Sustain, Release) envelope or an AHD (Attack, Hold, Decay) envelope to modulate your param-
eters. If you choose One-shot mode, only the AHD envelope (pictured) will be available for

modulation.

Envelope Controls
Attack
Hold
Decay
Sustain
Release
section offers an additional envelope allowing further modifica-
Engine), so that you have either an ADSR (Attack, Decay,
Description
The time it takes for the envelope to reach its maximum level.
How long the envelope will stay at its maximum level.
With Decay you adjust how fast the envelope drops to the sustain
level in ADSR mode; in AHD mode it is used to adjust how fast the
envelope fades out.
The envelope level that will be maintained as long as the note is
played.
The time for the sustain level to return to zero after the note has
ended.
AMPLITUDE ENVELOPE
MASCHINE MIKRO - Manual - 289
Working with Plug-ins
The Sampler Plug-in
section on page 2