Tom - High - Native Instruments MASCHINE MIKRO MK3 Manual

Element
SCALE Section
Velocity
9.5.4 Tom 3 High
The High Tom is an acoustic tom that complements the Floor Tom. With very few parameters it
provides a wide range of tom rolls and fills.
The parameters described below are presented as they appear in the Control area (Arrange view).
The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix view). See
±13.4, The Plug-in Strip
Main Page
Element
MAIN Section
Engine
Tune
Decay
Description
Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From the mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
for more information on this.
Description
Selects the engine used in the Tom plug-in. For more information
on the available engines, please refer to section
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 57.00
(NOTE A2) to 71.00 (NOTE
Adjusts the duration of the sound9s tail, measured as a percentage.
Available values range from 0.0 to 100.0% (default: 50.0%).
±9.5, The
B3). The default value is 57.00.
MASCHINE MIKRO - Manual - 381
Using the Drumsynths
The Toms
Toms.