Native Instruments MASCHINE MIKRO MK3 Manual page 551

▪ Switch the Mixer display between Sounds and Groups (see section
Groups vs. Displaying
▪ Focus/select particular channels (see section
▪ Rename the channel: Double-click its current name, type a new name on your computer
keyboard, and press [Enter] to confirm (or [Esc] to cancel). You can also use the Rename
entry in the channel9s context menu.
▪ Other management commands: Right-click ([Ctrl]-click on macOS) the header background
to open the channel9s context menu (see section
Mixer).
(2) Audio input settings (Sound strips only): Allows you to adjust the audio input routing. Visible
only if the IO button is enabled on the left of the Mixer. Click the
audio input, and adjust its level via the little knob on the left. These controls are equivalent to
the Source and Gain parameters in the
±12.1.1, Sending External Audio to Sounds
tion
(3) MIDI input settings: Allows you to adjust the MIDI input routing. Visible only if the
is enabled on the left of the Mixer. Click the
select a channel via the little menu on its right. These controls are equivalent to the
and Channel selectors in the
±12.2.1, Triggering Sounds via MIDI Notes
tively. See section
(4) Plug-in List: Shows the Plug-ins loaded in the channel. Visible only if the Plug-in icon is
enabled on the left of the Mixer. Following actions are available:
▪ Click the little <+= symbol to open the Plug-in menu and load a new Plug-in at the end of
the list.
▪ Right-click (macOS: [Ctrl]-click) an existing Plug-in to replace it with another Plug-in or to
remove it (to do this, select None in the menu).
▪ Click a Plug-in name to select it. If this Plug-in is currently hidden in the Plug-in Strip un-
der the Mixer, it automatically scrolls to show the interface of that Plug-in (see section
±13.4, The Plug-in
▪ Click the little square left of a Plug-in to bypass it (the bypassed Plug-in is grayed out) or
re-insert it in the signal chain.
▪ Drag and drop Plug-ins to move them across the list.
Sounds).
Audio
MIDI page of the Sound9s and Group9s Input properties, respec-
Strip).
±13.2.3, Selecting Channel
±13.2.4, Managing Your Channels in the
AUDIO IN
page of the Sound9s Input properties. See sec-
for more information.
MIDI IN label to select a MIDI input port, then
for more information.
Controlling Your Mix
±13.2.1, Displaying
Strips).
label to select an
IO button
Source
MASCHINE MIKRO - Manual - 551
The Mixer