Hi-Hat - Memory - Native Instruments MASCHINE MIKRO MK3 Manual

Element
Seed
Dissonance
Advanced Page
For this engine the Advanced
Modulation Page
As with all other engines and Drumsynths, the
ity.
Element
SCALE Section
Velocity
9.4.3 Hi-hat 3 Memory
The Memory hi-hat is similar to a typical sample-based cymbal but with a modern twist, using
analyzed and reconstructed timbres rather than just a recorded sample.
Description
Selects a random sequence to control the waveform produced by
the oscillator. Each of the 31 seed values available produces a
different set of random pitches and harmonics.
Affects the randomization of the oscillator, measured as a
percentage. Available values range from 0.0 to 100.0 % (default:
25.0 %). Higher values introduce more randomization, resulting in
a more noisy sound. Lower values produce a more melodic,
oscillator-like sound.
page does not contain any parameters.
Modulation
Description
Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
page contains one parameter:
MASCHINE MIKRO - Manual - 366
Using the Drumsynths
The Hi-hats
Veloc-