The Filter panel in the Plug-in Strip.
Main Page
The Filter in the Control area: Main page.
Parameter
TYPE Section
Mode
FREQ Section
Cutoff
Resonance
MOD Section
Description
Select between four different filter modes: LP (low-pass), BP (band-
pass), HP (high-pass), and Notch. Depending on the mode
selected, the following parameters vary as indicated.
Controls the cutoff frequency of the filter.
Controls the amount of resonance, i.e. the amount of amplification
near the cutoff frequency. It is not available with filter mode Notch.
Effect Reference
Filtering Effects
MASCHINE MIKRO - Manual - 610