Native Instruments MASCHINE MIKRO MK3 Manual page 386

Element
HARMONICS Section
KTr. Mode (Key
Tracking Mode)
Freq A
Freq B
Freq C
FM
AM
Description
Selects from two key tracking modes: Harmonic (default) and
Dissonant.
In Harmonic mode all oscillators track the
Main page, see above) and your keyboard evenly. Therefore, the
drum stays in tune with itself as the
and can be played chromatically across a keyboard or the pads.
In Dissonant mode the oscillators track the
your keyboard) unevenly. Therefore, the drum produces dissonant,
detuned harmonics when the
you play different notes on a keyboard or the pads.
Adjusts the pitch of oscillator A within the feedback oscillator bank,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 50.0 %).
Adjusts the pitch of oscillator B within the feedback oscillator bank,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 50.0 %). Note that this parameter has no effect
when FM and AM are set to zero (see below).
Adjusts the pitch of oscillator C within the feedback oscillator bank,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 29.1 %). Note that this parameter has no effect
when FM and AM are set to zero (see below).
Adjusts the amount of frequency modulation within the feedback
oscillator bank, measured as a percentage. Frequency modulation
tends to add bell-like, ringing overtones. Available values range
from 0.0 to 100.0 % (default: 34.4 %).
Adjusts the amount of amplitude modulation within the feedback
oscillator bank, measured as a percentage. Amplitude modulation
tends to add brash, bright overtones. Available values range from
0.0 to 100.0 % (default: 18.6 %).
Tune parameter (on the
Tune parameter is adjusted,
Tune parameter you9re
Tune parameter is adjusted or when
MASCHINE MIKRO - Manual - 386
Using the Drumsynths
The Percussions