Native Instruments MASCHINE MIKRO MK3 Manual page 404

Element
Mod. Amt.
Decay
Tone Section
Drive
Note Section
Glide Time
Advanced Page
For this module the Advanced
Element
Note Section
Glide
Description
Adjusts the amount of envelope applied to the filter cutoff (range:
0.0% 3 100%). To increase the amount of modulation applied to
the Cutoff, turn the Mod. Amt.
dragging upwards.
Adjusts the rate at which the sound fades to silence (range: 0.0% 3
100%). To increase the decay amount, turn the
clockwise by clicking and dragging upwards.
Adjusts the amount of drive (range: -100% 3 100%); -100%
increases the input level for the filter, driving the signal internally
into saturation, and 100% controls the drive level of the distortion
at the end of the signal chain. To adjust the amount of drive, turn
the Drive knob by clicking and dragging upwards or downwards.
Adjusts the time it takes to glide from one pitch to the next (range:
10 ms 3 1000 ms). To adjust the amount of glide time, turn the
Glide Time knob by clicking and dragging upwards or downwards.
page contains just one parameter.
Description
Globally enables the glide parameter. Once set to on, the note will
continuously play in a monophonic manner.
knob clockwise by clicking and
Decay
MASCHINE MIKRO - Manual - 404
Using the Bass Synth
Bass Synth 3 General Handling
knob