Native Instruments MASCHINE MIKRO MK3 Manual page 552

This Plug-in List is the exact equivalent of the Plug-in List in the Control area of the Arrange
view. For all details, see section
(5) Fader section: Allows you to adjust the channel9s level, panoramic position, Mute and Cue
state. Following actions are available:
▪ Drag the fader vertically to adjust the level of the channel. This is equivalent to the
parameter in the Audio
the Main Output of Sounds and
time the level of the channel. The peak level value appears in gray above the level meter
and fader. If this peak value exceeds zero, it turns white to indicate clipping; click the val-
ue to reset it.
▪ Drag the little horizontal slider at the top to adjust the panoramic position of the channel in
the stereo field. This is equivalent to the
Output properties (see
▪ Click the Mute button to mute the channel, or right-click ([Ctrl]-click on macOS) it to mute
all other channels (Solo function). See section
▪ Click the little headphones button to send the channel to / remove it from the Cue bus. This
is equivalent to the
See section ±13.2.6, Using the Cue Bus
(6) Main audio output menu: Selects the destination of the channel9s main audio output. By de-
fault Sound channels are output to their parent Group, Group channels are output to the Mas-
ter, and the Master is output to the first stereo pair of outputs. Click the label to select another
destination. This control is equivalent to the
properties for the Sounds and Groups (see
and Groups) and for the Master (see
SCHINE).
(7) Aux routing settings: Allows you to adjust the routing for both auxiliary outputs. Visible only
if the AUX button is enabled on the left of the Mixer. Click the
a destination for this aux output, adjust its level via the little knob on the right, and choose its
pre/post tapping point by clicking the
Dest., Level, and Order
±12.1.3, Setting Up Auxiliary Outputs for Sounds and
ties, respectively (see
±7.1, Plug-in
Overview.
page of the channel9s Output properties (see
Groups). Additionally, the level meter shows you at any
Pan
±12.1.2, Configuring the Main Output of Sounds and
Cue parameter in the
for more information.
Dest.
±12.1.2, Configuring the Main Output of Sounds
±12.1.4, Configuring the Master and Cue Outputs of MA-
Post or
parameters in the Aux page of the Sound9s and Group9s Output proper-
parameter in the Audio
±6.3.1, Mute and Solo
Audio page of the channel9s Output properties.
selector in the Audio
AUX 1
Pre label. These controls are equivalent to the
Controlling Your Mix
Level
±12.1.2, Configuring
page of the channel9s
Groups).
for more information.
page of the Output
or AUX 2 label to select
Groups).
MASCHINE MIKRO - Manual - 552
The Mixer