Native Instruments MASCHINE MIKRO MK3 Manual page 745

Parameter Description
STRETCH section
TUNE Adjusts the detuning (pitch shifting) to be applied (in semitones and
cents). Leave this value to
FORMANT C Enables/disables the formant correction. Formant correction allows the
(Formant Correction) pitch-shifted audio to retain the timbre (or <color=) of the original
audio as much as possible. This is especially useful for melodic
instruments.
MODE Selects between
In
(the beats and bars) of the original audio. This can be useful if you
sampled a loop with a clearly defined rhythm (e.g., a drum loop).
In
signature of the source. This is more suited for non-rhythmic Samples.
In this mode only one parameter is available:
AUTO DTCT (Auto If enabled, MASCHINE automatically detects the tempo of the original
Detection, Beat audio.
mode only)
SRC BPM (Source Allows to define the tempo of the original audio (in BPM). This tempo
BPM, Beat mode is defined in different ways according to the
only)
If
original audio. You can choose between 1/2, 1, and 2 bars. The
number between brackets indicates the resulting tempo (in BPM)
derived from the number of bars you have set and the computed
tempo value.
If
original audio (in BPM).
NEW BPM Defines the target tempo of the time-shifted audio (in BPM).
(Beat Mode only)
Beat and
Beat mode, the new tempo is defined relative to the time signature
Free mode, the new tempo is defined independently from the time
AUTO DTCT is enabled, you can set the length (in bars) of the
AUTO DTCT is disabled, you can directly define the tempo of the
0.00 to leave the original pitch untouched.
Free mode:
SPEED
AUTO DTCT
MASCHINE MIKRO - Manual - 745
Sampling and Sample Mapping
Editing a Sample
(see below).
value: