Creating A Send Effect - Native Instruments MASCHINE MIKRO MK3 Manual

±14.2.2, Step 2: Set up a Sound to Receive the External Input
Sound in section
the Plug-in List should be empty:
2. Click the <+= icon at the top of the Plug-in List.
The Plug-in menu opens and shows a list of all available Instrument and Effect Plug-ins.
3. Click the desired effect in the list. If you have VST/AU effect plug-ins installed you may
also load them from the menu by selecting the Native Instruments (Native Instruments
products) or External (third-party products) submenu at the top of the list.
²
Upon your selection the effect is loaded in a new Plug-in slot and directly starts to proc-
ess your external audio!
14.3

Creating a Send Effect

Sometimes you may want to have a classic send effect, for example a reverb which can be
shared by multiple sound sources. To make use of a send effect, you need to:
▪ Step 1: Set up a Sound or Group as send effect. This is done by loading an effect into its
±14.3.1, Step 1: Set Up a Sound or Group as Send
first Plug-in slot:
▪ Step 2: Route a portion of the desired audio signals from their original Sounds and Groups
to that send effect. This is done via the Output properties of the corresponding Sounds and
±14.3.2, Step 2: Route Audio to the Send
Groups:
Effect.
Effect.
MASCHINE MIKRO - Manual - 584
Using Effects
Creating a Send Effect
above,