Using Midi Mode - Native Instruments MASCHINE MIKRO MK3 Manual

²
MASCHINE will send a MIDI Clock signal to any connected device that is capable of re-
ceiving MIDI Clock.
You can adjust the MIDI Clock offset in the
ences 3 MIDI Page
If you want MASCHINE to send other MIDI messages than MIDI Clock, in particular if you want to
control other MIDI-capable devices via the notes played in MASCHINE, please refer to section
±12.2.5, Sending MIDI from
3.7.4

Using MIDI Mode

Your controller provides a fixed MIDI Mode implementation which allows you to directly control
other MIDI devices using a fixed implementation of MIDI Control Change messages.
To access MIDI Mode on your controller:
►
Press SHIFT + Project button (top left hand side).
²
The controller enters MIDI Mode.
In MIDI mode the controls on your device are mapped as depicted in the following image:
MIDI
for more information.
Sounds.
Integrating MASCHINE into a MIDI Setup
page of the Preferences panel. See
MASCHINE MIKRO - Manual - 120
Basic Concepts
±3.6.3, Prefer-