Other Operations On Effects - Native Instruments MASCHINE MIKRO MK3 Manual

14.1.2

Other Operations on Effects

You can manipulate effects like any other Plug-in loaded in a Plug-in slot. This notably in-
cludes adjusting the effect parameters, removing effects, moving effects to other Plug-in slots,
saving and recalling effect presets, etc.
Here we provide a reminder of every operation available on the effects both in Arrange view
and Mix view.
Concerning the procedures listed below, the only difference between Arrange view and Mix view is
the way to open the Plug-in menu: In Arrange view you open it by clicking the Plug-in slot9s down-
pointing arrow, whereas in Mix view you open it by right-clicking ([Ctrl]-clicking on macOS) the ef-
fect name in the Plug-in List.
Action
All Effects
Insert an effect after an
existing Plug-in
Replace an effect
Remove an effect
Move an effect within the
Plug-in List
Move an effect to another
channel (Sound, Group, or
Master)
Duplicate an effect
Procedure
From the Browser or from your operating system, drag and
drop the desired effect preset between two existing Plug-in
slots.
Open the Plug-in menu, and select another effect from the
menu.
Open the Plug-in menu, and select None from the menu.
Click and hold the effect in the Plug-in List, drag your mouse
to the desired location (an insertion line appears where the
effect will be dropped), and release the mouse button.
First, open the source slot9s Plug-in menu and select Cut.
Then open the Plug-in menu of the desired slot in the target
channel (Sound, Group, or Master) and select Paste.
First, open the source slot9s Plug-in menu and select Copy.
Then open the Plug-in menu of the desired slot in the target
channel (Sound, Group, or Master) and select Paste.
Applying Effects to a Sound, a Group or the Master
MASCHINE MIKRO - Manual - 578
Using Effects