Native Instruments MASCHINE MIKRO MK3 Manual page 743

17.3.2 Audio Editing Functions
In the Edit page, the Audio Toolbar provides various audio functions. These will be performed
on the selected region of the Sample, as defined by the
LECTION RANGE section (see
►
To apply any audio function to the selected region in your Sample, click the desired icon
in the Audio Toolbar.
These audio editing functions are destructive, i.e. they modify the audio material in the Sample.
However, your original Sample will not be modified: For each audio function that you perform, a
new, distinct copy of the Sample will be saved!
The playback settings of the Sample (e.g., tune, amplitude envelope, etc.) can be adjusted on the
Zone page. See section
The Audio Toolbar.
The Audio Toolbar provides following audio processing functions:
Command
TRUNCATE
NORM. (Normalize)
REVERSE
FADE IN
FADE OUT
±17.3.1, Using the Edit Page
±17.5.4, Selecting and Editing Zones in the Map View
Description
This deletes the part of the Sample that is outside of the selected
region.
This adjusts the level of the selected region to the maximum possible
value without clipping.
This reverses the selected region of the Sample.
This applies a fade in to the selected region of the Sample.
This applies a fade out to the selected region of the Sample.
Sampling and Sample Mapping
Start and End parameters of the
above).
for more information.
MASCHINE MIKRO - Manual - 743
Editing a Sample
SE-