Native Instruments MASCHINE MIKRO MK3 Manual page 667

Main Page
Parameter
MODE
Mode
TOUCHSTRIP
Engage
Position
TREMOLO
Trem/Vibr
Vibr Mode
Attk/Rel
Stereo
Description
Select an effect.
Enables and disables the effect.
Controls the tremolo and vibrato rate and depth, within the
ranges defined by the Min and Max parameters on the second
page.
Controls the balance between tremolo (modulation of
amplitude) and vibrato (modulation of frequency/pitch).
Sets the vibrato mode. Two are available: Varispeed, which
modulates the playback speed of the audio, much like moving
the pitch control on a turntable or tape player, and Freq Shift,
which uses a modulated frequency shifter. Freq Shift
produces a somewhat detuned sound due to the nature of the
frequency shifting4low frequencies are more audibly shifted
than high frequencies. Varispeed scales pitches evenly across
the audible range, but it introduces small fluctuations in
timing.
Controls the speed at which the effect comes on after turning
the effect on and tails off after releasing the effect.
Controls the stereo width of the modulation.
Effect Reference
MASCHINE MIKRO - Manual - 667
Perform FX