Native Instruments MASCHINE MIKRO MK3 Manual page 236

Muting a Group
1. To mute a Group, click the Group index (letter + number) on the left side of the Group in
the Arranger:
Muting a Group.
2. To unmute the Group, click the Group index again.
Soloing Sounds and Groups on the Controller
1. Press SOLO to enter Solo mode.
2. To solo a Sound, press the related pad.
3. To solo a Group, press
Muting Sounds and Groups
1. Press MUTE to enter Mute mode.
2. To mute a Sound, press the related pad.
3. To mute a Group, press
In both Solo and Mute modes you will note that on your controller the unmuted pads and
Group buttons are fully lit while the muted ones are dim lit (and the empty ones are off).
Since soloing a Sound mutes all Sounds except one, the
lease= Sounds that have been muted. You can use this technique to create a breakdown: Solo a giv-
en Sound such as a kick drum, then build the track up again by bringing the muted Sounds back in
one at a time while holding the
GROUP followed by the related pads 9316.
GROUP followed by the desired pads 9316.
MUTE button.
MUTE button can then be used to <re-
MASCHINE MIKRO - Manual - 236
Playing on the Controller
Playing Tools