Native Instruments MASCHINE MIKRO MK3 Manual page 491

If MASCHINE is running as a plug-in, the external stereo inputs Ext. 134 available in the
selector of the MAIN
mixer channels from your DAW to individual Sounds within MASCHINE, for example. Please refer to
your host documentation to know how to route signals to the virtual audio inputs of your MASCHINE
plug-in.
As any Parameter page of any Channel properties or Plug-in, this page is also available on your con-
troller. To access it and change its parameters, simply use the common workflow described in
±3.3.5, Navigating Channel Properties, Plug-ins, and Parameter Pages in the Control
more, you will find a step-by-step use case in
Configuring External Inputs for Sounds in Mix View
You can also easily send external audio to Sounds in MASCHINE9s Mixer:
1. Click the Mix View button on the left of the Arranger to switch from Arrange view to Mix
view:
2. Open the extended view of the Mixer by clicking the down-pointing arrow on the left of the
Mixer:
3. Check that the IO
and display the input/output settings of each channel strip.
section will correspond to virtual inputs in your host. This allows you to send
button is active on the left of the Mixer 4 if not, click it to enable it
Audio Routing, Remote Control, and Macro Controls
±14.2, Applying Effects to External
Audio Routing in MASCHINE
Source
Area. Further-
Audio.
MASCHINE MIKRO - Manual - 491