Panel For The Sampler - Native Instruments MASCHINE MIKRO MK3 Manual

For an exhaustive description of the parameters available in each panel, please refer to chapter
±9, Using the Drumsynths
fects.
Parameter modulation is not indicated in the panel for Internal Plug-ins. As a consequence, the val-
ue of modulated parameters might change even if their control element doesn9t move in the panel.
±11.5, Recording and Editing Modulation
See section
13.4.3

Panel for the Sampler

For the Sampler, the Plug-in Strip provides a custom panel containing a judicious mix of pa-
rameters available in the three first pages of the Control area along with parameters available
in the Zone page of the Sample Editor.
As with all other Plug-ins, the panel for the Sampler shows the Plug-in Header at the top. This
Header contains the name of the current preset and the Quick Browse icon 4 see section
±13.4.1, The Plug-in Header
The Sampler panel contains two distinct panes:
clicking the MAIN and
respectively.
Parameter modulation is not indicated in the panel for Internal Plug-ins. As a consequence, the val-
ue of modulated parameters might change even if their control element doesn9t move in the panel.
±11.5, Recording and Editing Modulation
See section
for Drumsynths and chapter
above for more details.
ZONE button in the Pane selector at the top of the Sampler interface,
±15, Effect Reference
for more on modulating parameters.
MAIN and ZONE. These can be displayed by
for more on modulating parameters.
MASCHINE MIKRO - Manual - 561
Controlling Your Mix
The Plug-in Strip
for Internal Ef-