Native Instruments MASCHINE MIKRO MK3 Manual page 756

Selects from three modes controlling the automatic note creation upon Slice export. The mode
selected here will be used both when clicking the
Dragger (2). Following options are available:
▪ Create Pattern (default setting): Upon Slice export a new Pattern will be created with one
note for each pitch (if Slices are exported to a Sound) or one note for each Sound (if Slices
are exported to a Group) so that the Pattern reproduces the original, unsliced Sample.
▪ Replace Pattern: Upon Slice export a sequence of notes will be created in the current Pat-
tern so that the Pattern reproduces the original, unsliced Sample. If the sequence is short-
er than the current Pattern it will be repeated to fill the Pattern; if the sequence is longer
than the Pattern the Pattern will be extended according to the Pattern Grid and the content
of other Sounds will be repeated.
◦ If Slices are exported to a Sound, the sequence of notes will contain one note for each
pitch. Any existing notes for that Sound will be replaced. Notes for other Sounds in
the Pattern will stay untouched.
◦ If Slices are exported to a Group the sequence of notes will contain one note for each
Sound containing a Slice. Any existing notes for these Sounds will be replaced. Notes
for other Sounds in the Pattern will stay untouched.
▪ No Pattern: No Pattern is created, and the current Pattern is left untouched.
Play around with the slicing feature by removing some of these notes, quantizing or completely rear-
ranging them!
The notes in the picture above represent the Slices and trigger them in order to play the Sam-
ple with correct timing and pitch. If you change the tempo of your Project, you will hear that
the loop automatically adjusts to the new tempo.
Exporting Single Slices
You can also export an individual Slice to another Sound by drag-and-drop:
Apply button (1) and when using the Slice
MASCHINE MIKRO - Manual - 756
Sampling and Sample Mapping
Slicing a Sample