With
SLICE
or
REMOVE
corresponding pads on your controller!
17.4.4
Applying the Slicing
Once you are satisfied with the proposed and/or manually adjusted Slices (see section
±17.4.2, Adjusting the Slicing
original Sample and create these Slices. This is done via the three elements at the bottom
right of the
Slice
page:
You can apply the slicing in various ways.
(1) Apply button
enabled, you can still prelisten to your individual Slices by pressing the
Settings), you can apply the slicing in order to actually cut the
3
Sampling and Sample Mapping
Slicing a Sample
1
2
MASCHINE MIKRO - Manual - 754