Tom - Tronic - Native Instruments MASCHINE MIKRO MK3 Manual

For more information on engines, see
general information on the Snare and the other Drumsynths, see
dling.
9.5.1 Tom 3 Tronic
The Tronic engine is the default engine of the Tom.
A fat, analog-style tom with two tunable oscillators plus a tunable FM oscillator.
The parameters described below are presented as they appear in the Control area (Arrange view).
The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix view). See
±13.4, The Plug-in Strip
Main Page
Element
MAIN Section
Engine
Tune
Decay
±9.1.1, Engines: Many Different Drums per
for more information on this.
Description
Selects the engine used in the Tom Plug-in. If you change this
setting, please refer to
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 36.00 to
60.00. The default value is 36.00. For more details see
Pitch Range, Tuning, and MIDI
Adjusts the duration of the sound9s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
±9.1, Drumsynths 3 General Han-
±9.5, The
Toms.
Notes.
MASCHINE MIKRO - Manual - 373
Using the Drumsynths
The Toms
Drumsynth. For
±9.1.5,