Native Instruments MASCHINE MIKRO MK3 Manual page 95

Setting
Sample Rate
ASIO Config (Windows only) Click
Latency
Routings
Input
Output
Description
This displays the selected sample rate of your audio interface.
Restart MASCHINE after changing the sample rate.
Open Panel to access specific controls related to your
audio interface. Please consult the documentation that came
with your audio interface for more information.
macOS: This slider allows you to adjust the latency of your audio
interface in samples. Lower values result in a more immediate
playing response but are heavier on both the CPU and the audio
driver, and may result in audible clicks and pops. Larger values
are easier on the CPU, but introduce a larger latency (i.e., there
may be a small delay in sound playback when you play on the
pads). You should therefore experiment with this setting so that
it is as low as possible without overloading your CPU or
introducing any audio artifacts.
Windows: When using an ASIO driver, the
Settings panel displays an
Latency slider. Click this button to open the settings window of
the selected ASIO driver.
Click Inputs to display the Routing Inputs. Here you can select
which inputs on your audio interface should be used for the four
stereo inputs of MASCHINE. Select the inputs of your audio
interface on the right column by clicking the fields: you will be
presented with a drop-down menu with all the available Inputs.
The choices made here will determine which inputs can be used
when sampling external sources, for example.
Click Output to display the Routing Outputs. Here you are
presented with a list of the 16 stereo outputs from MASCHINE:
In the right column, you can assign them to the outputs of your
audio interface. Click the fields in the right column to select the
desired outputs via a drop-down menu.
Audio and MIDI
ASIO Config button instead of the
MASCHINE MIKRO - Manual - 95
Basic Concepts
Preferences