Native Instruments MASCHINE MIKRO MK3 Manual page 324

Hide thumbs Also See for MASCHINE MIKRO MK3:

Table of Contents

ATTACK Section

Advanced Page

For this engine the

Adjusts the amplitude of the pitch envelope applied throughout the

sound duration (punch), measured as a percentage. Available values

range from 0.0 to 100.0 % (default: 6,8 %). At zero, the sound

stays at its original pitch during its entire decaying phase. As the

value is increased, an increasing amount of pitch envelope is

applied. This means that the pitch of the drum starts at a higher

value and falls to the original value as the sound decays. The

value, the higher the starting pitch.

Adjusts the decay time of the pitch envelope, measured as a

percentage. Available values range from 0.0 to 100.0 % (default:

30 %). Note that if the

value, you won9t hear the entire pitch drop but only its

beginning 4 i.e. you will hear a higher pitch than the one set by

Selects the style of the attack: Thin selects a thin-sounding click,

Thick selects a slightly rounder click with added noise, and Noise

uses just a noise burst for a less clicky attack.

Only available if Thick or Noise is selected in the

Adjusts the color of the attack, measured as a percentage. Available

values range from 0.0 to 100.0 % (default: 50.0 %). At lower

values the attack is duller. Increase the

incisive attack.

Adjusts the level of the attack. Available values range from 0.0 %

(soft attack) to 100.0 % (maximum attack). The default value is

page does not contain any parameters.

value is too long compared to the

value to get a more

MASCHINE MIKRO - Manual - 324

Using the Drumsynths

Show Quick Links

Table of Contents