Native Instruments MASCHINE MIKRO MK3 Manual page 415

►
To adjust the Arrange Grid resolution, click the value beneath the Groups in the Arrange
view and select the desired setting from the menu (see above for the available settings).
²
The divisions of the Arrange Grid now have the size you have just selected.
The following Arrange Grid resolutions are available:
▪ 1 Bar, 1/2 note, ..., 1/16th note: Each of these settings lets you adjust the Pattern Length by
the specified increment.
▪ Off: The Arrange Grid is disabled. Notably, you can freely set the Pattern Length to any val-
ue or set the playback position to any location.
▪ Quick (default): With this setting, the available lengths for your Pattern are as follows: 1
bar, 2 bars, 4 bars, 8 bars, 12 bars, 16 bars, etc. (+ 4 bars each time starting from 4
bars). This handy mode allows you to quickly select from the most common Pattern
Lengths. For other uses of the Arrange Grid (adjusting the playback position and the Loop
Range), one-bar divisions are used instead.
Adjusting the Pattern Length
You can adjust the length of your Patterns to fit your needs. The Pattern Length is measured in
bars and beats, and Patterns can be up to 256 bars long. When you create a new empty Pat-
±11.7.3, Creating
tern (see
fault page of the Preferences
You can adjust the Pattern Length in two ways:
Patterns), the Pattern has the default length as defined in the
±3.6.1, Preferences 3 General
panel (see
Working with Patterns
Pattern Basics
De-
Page).
MASCHINE MIKRO - Manual - 415