Snare - Breaker - Native Instruments MASCHINE MIKRO MK3 Manual

9.3.10 Snare 3 Breaker
The Breaker snare is an acoustic high pitched snare drum that cuts through perfectly into mix-
es containing heavy bass. The adjustment of the wires spectrum provides a great range of
snares. It also works very well with the Rasper Kick.
The parameters described below are presented as they appear in the Control area (Arrange view).
The same parameters are available in the Plug-in panel within the Plug-in Strip (Mix view). See
±13.4, The Plug-in Strip
Main Page
Element
MAIN Section
Engine
Tune
Decay
Skin Tune
Impact
Advanced Page
For this engine the Advanced
for more information on this.
Description
Selects the engine used in the Snare plug-in. For more information
on the available engines, please refer to section
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 61.00
(NOTE C#3) to 85.00 (NOTE
(NOTE C#4).
Adjusts the duration of the sound9s tail, measured as a percentage.
Available values range from 0.0 to 100.0% (default: 50.0%).
Adjusts the fine-tuning of the skin of the drum, measured as a
percentage. Available values range from 0.0 to 100.0% (default:
50.0%).
Adjusts the amount of click or initial attack, measured as a
percentage. Available values range from 0.0 to 100.0% (default:
75.0%).
page does not contain any parameters.
±9.3, The
C#5). The default value is 73.00
MASCHINE MIKRO - Manual - 359
Using the Drumsynths
The Snares
Snares.