Mono Audio Inputs - Native Instruments MASCHINE MIKRO MK3 Manual

2. To adjust the level and panoramic position of the Cue output, use the channel9s fader and
balance control (above the fader), respectively.
This is equivalent to setting the
(see above).
3. To select another destination for the Cue output, click the first area under the level meter
and select the desired destination in the menu.
This is equivalent to setting the
12.1.5

Mono Audio Inputs

Each Sound can be configured to receive external stereo or mono audio signals. You may use
audio signals from outside MASCHINE (from your audio interface if MASCHINE is used in
stand-alone mode, or from your host if MASCHINE is used in plug-in mode).
Level or Pan parameters in the
Output parameter in the
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
CUE section, respectively
MAIN section (see above).
MASCHINE MIKRO - Manual - 506