Native Instruments MASCHINE MIKRO MK3 Manual page 504

3. Click the background of the last header in the top right corner of the Mixer.
The Master/Cue channel strip appears underneath.
In this Master/Cue channel strip, do the following to configure the output of the Master chan-
nel:
1. Click Master in the strip9s header to show the controls for the Master channel.
2. To adjust the level and panoramic position of the main output, use the channel9s fader
and balance control (above the fader), respectively.
This is equivalent to setting the
(see above).
Level or Pan parameters in the
Audio Routing, Remote Control, and Macro Controls
Audio Routing in MASCHINE
MAIN section, respectively
MASCHINE MIKRO - Manual - 504