Table of Contents
Advertisement
Basic Concepts
Common Operations
2.2.6
Navigating Parameter Pages in the Parameter Area
In some situations, the selected Module or Properties provide more parameters than the dis-
plays on your controller and the Parameter area in the software can show at once. Examples of
this are the parameters for the Groups' or Sounds' Output Properties
(OUT
tab on the control-
ler,
OUT
button in the software) and those for the Sampler Module. In these cases, the number
of parameters is divided into several Parameter pages that you can easily navigate with the
hardware and software.
Hardware
On the MASCHINE hardware controller you can use the Page buttons to navigate through the
Parameter pages. Whenever there is more than one page, it will be shown on the right side of
the right display like this:
The display showing page 1 of 2 from the Group's Output Properties (OUT tab).
Moreover, if there is another page available to the left or to the right of the current page, the
corresponding Page button will be dim lit on your MASCHINE hardware controller.
Software
In the software you click the Page menu at the top left corner of the Parameter area to navi-
gate through the pages:
MASCHINE MIKRO MK2 - Manual - 29
Advertisement
Table of Contents
