Native Instruments MASCHINE MIKRO MK3 Manual page 762

►
Drag a Sample from the Browser9s
onto the desired entry in the Zone List.
or
1. Right-click ([Ctrl]-click on macOS) the desired entry in the Zone List and select Load
Sample... in the menu that opens.
A Load Sample dialog opens up.
2. Navigate to the desired audio file on your operating system and press [Enter] to confirm.
² The dragged or selected Sample replaced the previous Sample in the target Zone.
Selecting a Zone in the List
►
Click any Zone entry in the Zone List to put it under focus.
² The focused Zone gets highlighted in color both in the list and in the Map view (if visible).
In addition:
▪ The focused Zone is displayed in the Sample view and its settings appear in the Zone set-
tings at the bottom of the page. See section
information on these settings.
▪ The focused Zone also appears on the
process of its contained Sample. For more information on the
±17.3, Editing a Sample
refer to section
LIBRARY or FILES pane or from your operating system
±17.5.6, Adjusting the Zone Settings
Edit and Slice pages, which allows you to further
±17.4, Slicing a
and
Sampling and Sample Mapping
Mapping Samples to Zones
for more
Edit and Slice pages, please
Sample, respectively.
MASCHINE MIKRO - Manual - 762