Native Instruments MASCHINE MIKRO MK3 Manual page 82

Element
Navigating Plug-ins, and Parameter Pages using the Controller
On the controller, do the following:
1. Set the focus on the desired Sound, Group or the Master (see section
a Group or a Sound).
2. At the top of the controller, press the PLUG-IN.
3. If you have more than one Plug-in loaded, use the Arrow buttons to navigate them.
4. Press the Encoder to display the parameter properties of the selected Plug-in.
5. Use the Arrow buttons to navigate through each parameter, or
navigate the parameter pages of the selected Plug-in.
6. Turn Encoder to adjust the value of the selected parameter. Hold
encoder to adjust the value in finer increments.
7. Press Plug-in again to return to the top level if you want to navigate the plug-ins again.
Action
Knob: Click the knob and drag your mouse vertically to change
the parameter value. Hold [Shift] on your computer keyboard and
drag your mouse to adjust the value in finer increments.
Button: Click the button to switch its state. When the button is
enabled, it shows a small colored LED.
Selector: Click the displayed value to open the drop-down list,
and click another value in the list to select it.
Common Operations
±3.3.3, Focusing on
SHIFT + Arrow buttons to
SHIFT while turning the
MASCHINE MIKRO - Manual - 82
Basic Concepts