Native Instruments MASCHINE MIKRO MK3 Manual page 376

Main Page
Element
MAIN Section
Engine
Tune
Decay
Bend
Impact
Description
Selects the engine used in the Tom Plug-in. If you change this
setting, please refer to
Adjusts the pitch of the drum played by the middle C, measured in
MIDI note numbers and cents. Available values range from 48.00 to
72.00. The default value is 48.00. For more details
Pitch Range, Tuning, and MIDI
instrument is heavily dependent on the settings on the
page (see below).
Adjusts the duration of the sound9s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Adjusts the pitch sweep of the sound, measured as a percentage.
Available values range from -100.0 % to 100.0 % (default: 0.0 %).
At zero the sound stays at its original pitch during its entire
decaying phase. At higher values, the pitch bends upwards. At lower
values, the pitch bends downwards.
Adjusts the amount of attack, measured as a percentage. Available
values range from 0.0 % (soft attack) to 100.0 % (maximum
attack). The default value is 80.0 %.
±9.5, The
Toms.
Notes. Note that the pitch of this
MASCHINE MIKRO - Manual - 376
Using the Drumsynths
The Toms
see±9.1.5,
Advanced