Native Instruments MASCHINE MIKRO MK3 Manual page 358

Element
Decay
Room
Focus
Advanced Page
For this engine the Advanced
Modulation Page
As with all other engines and Drumsynths, the
ity.
Element
SCALE Section
Velocity
Description
Adjusts the duration of the sound9s tail, but also the <spread=
between the individual claps, measured as a percentage. Available
values range from 0.0 to 100.0 % (default: 50.0 %).
Adjusts the balance between the dry sound 4 the claps themselves
4 and the synthesized room sound, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %). At
high values, extra <air= is added.
Adjusts the sharpness of each clap, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %). At
0.0 % the sound is very smooth; at 100.0 % the claps are very
sharp and staccato.
page does not contain any parameters.
Modulation
Description
Adjusts the velocity response of the drum. Available values range
from -100.0 % to 100.0 % (default value). At zero (mid course),
the drum is played at full velocity, no matter how hard you hit the
keys (or pads). From that mid position, by turning the knob to the
right you increase the positive velocity response and make the drum
more and more sensitive to the velocities at which you hit the keys/
pads. From the mid position, turning the knob to the left as the
inverse effect: the harder you hit the key/pad, the softer the
resulting drum sound will be.
page contains one parameter:
MASCHINE MIKRO - Manual - 358
Using the Drumsynths
The Snares
Veloc-