Native Instruments MASCHINE MIKRO MK3 Manual page 727

2. Click the Sample Editor button on the left of the Pattern Editor to switch to the Sample
Editor.
The Sample Editor appears and displays the Sample content of the focused Sound.
3. In the Sample Editor, click the desired tab at the top to access the corresponding page:
▪ The
Record page allows you to record audio:
▪ The
Edit page allows you to apply destructive edits to existing Samples:
Sample.
▪ The
Slice page allows you to create Slices from your existing Samples:
Sample.
▪ The
Zone page allows you to assign your Samples to particular note and velocity ranges
(called Zones) in your Sound and to adjust various playback settings for each Zone individ-
±17.5, Mapping Samples to
ually:
Entering Sampling Mode on the Controller
The equivalent to the Sample Editor on your controller is the Sampling mode. To enter Sam-
pling mode, do the following:
1. With your controller in Pad Mode, press the pad of the Sound in which you want to record
the Sample. For more details on how to set the focus to a Sound, please see section
±3.3.3, Focusing on a Group or a
2. Press SAMPLING
Sound.
In the software:
▪ The Record page allows you to record audio:
▪ The
Edit page allows you to apply destructive edits to existing Samples:
Sample.
Zones.
Sound.
to enter Sampling mode and access the Sample content of the focused
±17.2, Recording
Audio.
±17.2, Recording Audio.
MASCHINE MIKRO - Manual - 727
Sampling and Sample Mapping
Opening the Sample Editor
±17.3, Editing a
±17.4, Slicing a
±17.3, Editing a