Native Instruments MASCHINE MIKRO MK3 Manual page 356

Element
Decay
Skin Tune
Impact
Body
Advanced Page
The Advanced page contains parameters controlling the wires9 sound of the drum.
Element
SPECTRA Section
Mode
Decay
Amount
Modulation Page
As with all other engines and Drumsynths, the
ity.
Description
Adjusts the duration of the sound9s tail, measured as a percentage.
Available values range from 0.0 to 100.0 % (default: 50.0 %).
Adjusts the fine-tuning of the skin of the drum, measured as a
percentage. Available values range from 0.0 to 100.0 % (default:
50.0 %).
Adjusts how hard the drum is hit, measured as a percentage.
Available values range from 0.0 % (softest) to 100.0 % (hardest).
The default value is 75.0 %.
Adjusts the level of the snare body independently from level of the
snare wires, which is adjusted on the
Available values range from 0.0 to 100.0 % (default: 75.0 %).
Description
Selects from two different noise types that simulate the snare wires
of the drum. Available modes are A (default) and B.
Controls the length of the snare wires9 sound independently from
the main Decay parameter on the
from 0.0 to 100.0 % (default: 40.0 %).
Adjusts the amount of snare wire sound applied to the drum,
measured as a percentage. Available values range from 0.0 to
100.0 % (default: 75.0 %).
Modulation
Advanced page (see below).
Main page. Available values range
page contains one parameter:
MASCHINE MIKRO - Manual - 356
Using the Drumsynths
The Snares
Veloc-